Bellmouths
Bellmouths are used to protect your cable on entry or exit of a conduit as they stop the cable from rubbing against the sharp edge of the conduit or duct. Our Split Bellmouth Range allow you to pull in your cable and then remove the bellmouth and split it open to get it off the cable. This allows you to re-use the bellmouth on other jobs.
A50/NZ40
A50/NZ40
A63/NZ53
A63/NZ53
A80 / NZ80
A80 / NZ80
A90 / NZ75
A90 / NZ75
A100 / NZ100
A100 / NZ100
A110 / NZ90
A110 / NZ90
A125 / NZ125
A125 / NZ125
A14O
A150 / NZ140
A150 / NZ140
A150 / NZ150
A150 / NZ1540
MD(Grey)
HD(Orange)
MD(Grey)
HD(Orange)
MD (Grey)
HD (Orange)
MD (Grey)
HD (Orange)
MD (Grey)
HD (Orange)
MD (Grey)
HD (Orange)
MD (Grey)
MD (Grey)
MD (White)
HD (Grey)
HD (Orange)
MD(Grey)
HD(Orange)
49.70
49.70
62.70
62.70
88.70
88.70
90.00
90.00
114.10
114.10
110.00
110.00
140.00
140.00
140.00
160.00
160.00
160.00
160.00
2.80
3.40
3.00
3.90
3.20
4.20
6.3
5.4
4.50
7.20
9.50
9.20
5.5
7.20
3
6.30
8.30
10.0
10.0
44.10
42.90
56.70
54.90
82.30
80.30
75.0
79.0
105.10
102.3
95.0
91.60
129.0
125.00
135.0
147.40
143.40
150.0
150.0
Bellmouth Split. Our new long neck series is available in the following sizes nominal A80, A100, A125, A150 to suit Australian grey and orange conduit. Equivalent NZ sizes eg A110\NZ90.
New nominal 200mm Bellmouth Split will fit into nominal 195 ID Pipe or duct.
Bellmouth inserted into duct with rope running through it.
Bellmouth split open to remove it once cable installed in duct.